Plate heat exchanger gasket: What are the startup conditions of each device system of the plate heat exchanger? _
416 recently, a friend asked what are the startup conditions of the various device systems of the plate heat exchanger? I believe that many people don’t know much about this aspect. Today, the editor will share with you the gaskets of plate heat exchangers: What are the startup conditions of each device system of plate heat exchangers? Start-up conditions of each device system of the plate heat exchanger: 1. Domestic water system: Start the domestic water circulation pump, and put the primary pipe network into the heat exchanger, control the primary pipe network water supply valve, and adjust the domestic water temperature. 2. Softened water system: start the outlet valve of the indirect water intake tank. After the softened water system is filled with water, prepare soft water and start the water replenishment pump to replenish the secondary pipe network. 3. Steam-water exchange system: Before starting the steam-water exchange equipment, fill the water system of the secondary pipe network with water, start the circulating water pump, and then open the steam valve for soda-water exchange. 4. According to the specific operating regulations established by the respective systems, the heat exchanger should be operated strictly in accordance with the operating instructions to avoid damage caused by one-way pressure or excessive pressure inspection. 5. Water and water exchange system: After flushing, adjust the constant pressure parameters, put in heat exchange equipment, and start the secondary water pump. The editor of the above article shared with you the gasket of the plate heat exchanger: What are the startup conditions of each device system of the plate heat exchanger? If you have any questions about the gasket of the plate heat exchanger, the official website of Diguang Heat Transfer welcomes your consultation.